Bi-Luminophore PSP has low temperature sensitivity (< 50 Pa/oC) and provides compensation for the model displacement relative to the excitation light source as well as for the non-stability of the light source itself.

Sensitivity: Cured at room temperature for 3 hr. Curing at 65C for 15 - 30 min is recommended to obtain minimum temperature sensitivity. Pressure sensitivity is ~ 6%/psig at 1 atm.

Time Response: ~ 0.3 s.

Stability: Shelf life is 1 yr; photo-degradation is ~ 1%/hr.

Surface Properties: Smoother than standard FIB but relatively rough and brittle; can be scratched off with fingernail. Hydrophobic and not sticky. Thickness estimated at 10 ? 15 mm.


Copyright 2002 JungJin Pressure Systems All Rights Reserved.